3D Printer UV Resin Curing Light with Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer

3D Printer Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer UV Resin Curing Light

Feature:

Product material: ABS

Color:Silver

Heat resistant temperature: 80℃

Cold resistance temperature: -20 ℃

Solar battery voltage ：1.2V

Maximum weight load: about 300g-500g

Maximum rotation speed :4.5 circles/minutes

Size: approx. 10 x 10 x 4.5cm / 3.94 x 3.94 x 1.77 inch

Tray diameter: approx. 9cm / 3.5 inch

1. Maximum display /rotate weighing less than 500g(1.1Pound). If use UV light , close to light will help to speed up and rotate heavier.
2. Use power from UV lighting /nature Solar Power / Fluorescent Lighting, can't use batteries for power.
3. For rotate Resin 3D printed items to help better curing the resin or display small items before use, please make sure clean the resin items to be cured.
4. Solar panels on 4 sides ensure maximum light reception. The rotation direction can be reversed by stopping the rotary table with hand.
5. Using with UV light from our store to power the turntable is RECOMMENDED.